Power Driven 24v Pushrods for 98.5-18 Cummins

Power Driven 24v Pushrods for 98.5-18 Cummins

Out of stock
Stage
$260.00
$260.00
Sorry, this product is out of stock.

We'll let you know when it's back!

Sold out

Our Power Driven 24v Stage 1 Pushrods are 3/8" pushrods that offer incredible value and performance for your 24v Cummins.

All stage 2 and larger rods are 7/16" in diameter. They feature hard-drawn 4130/4135 seamless chromoly tubing. The tensile strength of this material is approximately 170,000 psi. These rods will easily handle 850 hp for stage 2 and 1,300+ hp for stage 3, and going to our stronger rods will yield little improvement at these power levels.

Break-In Procedure

  • Apply Cam Lube on all lobes, lifter faces, distributor gears, and oil pump gears.
  • Oil all bearing journals and lifter barrels.
  • Always turn the engine over by hand before starting. Check for clearances and proper timing location.
  • Fire up to 1800 – 2000 RPM for 18 – 20 minutes.

Note: Most oil companies have taken
out a percentage of additives that are meant for anti-scuffing for the break-in on flat tappet cams, so please ask your local auto parts
professional for the best zinc additive they have and add it to your oil before you fire up your engine for the first time (we prefer ZDD
Plus.) You can also order specialty oil from Power Driven Diesel here.